|
Eastern IA | We are running a 9500 combine with an Integra for our yield mapping. Had seed dealer out Friday and calibrated for yield and moisture, all was well. We were running it on Saturday and as we go across the field it reads yield as expected, but when we turn around on the end it shows 3000+ bu/acre yield. As soon as we enter crops again it goes back to normal. Any thoughts? We did all calibrations before starting (vibration, head height, etc.), and head shows as "off" when raised. It's not a huge deal but now our legend is off as there are 3000 bu/acre readings, so our entire map is red. Any thoughts/suggestions are appreciated. | |
|
Integra Yield Readout
