|
Glenwood, Mn | Was running 13.51 nav and 5.10 on the ez.
Now running. 13.51 nav and 10.13 on fmx
I did try a nav out of another machine with 13.75? And same error. I fact, tried another older nav with the same effect unsure of the fw version on that.
So three nav’s total now and two displays as mentioned above. Again, had issue in initial install. Cable from
Nav to valve checks out.
On “Large coil” installs (versatile and case 4wd) is the 3.2 ohm normal? | |
|