|
cropsey, il 61731 | I really like the stability of the paradymes and wouldn't mind using for another 10 years. I'm using waas/autosteer on a hagie sprayer and it's been great. The only issue I have is a steering sensor once in a while. The MX305 on paradyme using digifarm rtk works perfectly (I think I had a 10 minute drop out in 2 years). I have 2 more paradymes that were going on an stx325 and possibly a 7088 combine. Now it looks like "all is lost".
What I have now:
MX305 - paradyme (digifarm), integra, SAM, CNH steer kit (valve, steering sensor), 20/20 for planter
Hagie STS12 (non CAN) - paradyme integra, SAM, novariant steering valve kit, LC module, Aux module
7088 - pro 600, 162(?) antenna not steer ready, 20/20 yield monitor
STX325 - paradyme, ECU4, CNH steer kit (valve, steering sensor), compass or versa
If the paradyme goes away, it leaves a hole in my set up. Does the 6500/steer command replace the paradyme/sam directly (w/harness changes I assume)?
thanks | |
|
So are paradymes going to be toast in the next 6 to 18 months?
