|
| I’m trying to add an Intelliview IV to a T8020 that has never had one in it. Tractor is autosteer ready, had no problem adding a Nav and receiver, they plug right in. There doesn’t seem to be a harness for the Intelliview IV. Dealer hooked me up with a wiring harness and after taking apart half the tractor I think I discovered it’s the wrong one. An identical harness is already in the tractor hooked to all the same connections but it runs the front screen on the post, the one with simple tractor information. There’s no way I’m supposed to unhook that to run the Intelliview IV right? Anyone know what type of cable or harness I need to add? Dealer seems lost and confused.
 (D768AA72-7A0F-4A82-A33B-8BA42A3A917E (full).jpeg)
 (18C386CE-6596-4543-A84D-C715EE5F6316 (full).jpeg)
 (627F8261-6643-41F8-86DF-BB6CA421B674 (full).jpeg)
 (4D2A409B-3957-4740-96F7-EE59FE3DD30D (full).jpeg)
Attachments
----------------
 D768AA72-7A0F-4A82-A33B-8BA42A3A917E (full).jpeg (104KB - 14 downloads)
18C386CE-6596-4543-A84D-C715EE5F6316 (full).jpeg (121KB - 13 downloads)
627F8261-6643-41F8-86DF-BB6CA421B674 (full).jpeg (155KB - 16 downloads)
4D2A409B-3957-4740-96F7-EE59FE3DD30D (full).jpeg (165KB - 17 downloads)
| |
|
Mounting Intelliview IV on T8020
