|
West Central Missouri | What has someone found that works well for clipping barbed wire to these pipe posts? We are building a new 5-wire barbed wire fence. We are planning on using t-post for the majority, but every sixth post will be 2 7/8" pipe to keep it from leaning out from cows reaching through. In the past we have used half chain links that we welded on. Not a big fan of them and looking for other relatively inexpensive alternatives. I was thinking about 1/4" repair chain links that we could weld on in the shop before we drive the posts. Any suggestions? Thanks | |
|
2 7/8" pipe post fence clips
