|
Faunsdale, AL | I have an old CX 20 that I bought a while back. Got it out for the first time and I found one of the output shafts (left wing) was really wobbly. Opened it up and that gear is missing a good chunk out of several teeth. So I’m looking for someone that has an old one they’ve replaced that might have a usable gear in it. I can use one that’s dinged up a little if I have to. In my box, the center gear has some damage but the opposite side gear has escaped so far. Hoping I can find someone that has a wing gear so I don’t have to buy a set of 3 from JD. I could use a center gear too if you have one better than mine. Parts book shows early models with 3 gears the same size in the box. Mine is a later model with the center gear smaller than the outer/wing gears. Gear set is used on many models listed above in both 15 and 20’ cutters 334-341-0815 please call or text anytime. Jim
Edited by ccjersey 9/18/2023 20:02
| |
|
|
John Deere CX, HX, R, FC, M —- 15 or 20 splitter gearbox parts
