Near Intersection of I-35 & I-90 Southern Mn. | The Raven valves that I have worked with use a constant +12V for power which must be "hot" at all times. They use a constant ground which must be ground at all times. The third wire is the "trigger" when it is 12V or hot the valve should open. The order of the wires is extremely important and of the 6 possible combinations only one is correct.
I'm not that familiar with Field IQ (I avoid Trimble whenever possible) but it certainly should be able to handle that arrangement. If the wiring is arranged like the Raven it should work. There may be a setting that isn't set properly.
Edited by tedbear 9/10/2023 13:53
|
Trimble FM750 and Field IQ Booms not turning on
