|
| 2009 7120 is leaving a trail in one spot of wheat. very significant amount. so much you can see it from the grain cart or combine cab on next pass. it is. coming out the back of the machine. we have throughly checked for leaks and if you stop the machine you can't find it under the machine. only found in the chaff spread area. it is dropping in a area on the right side of the machine about a foot inside the inside dual. all combine setting have been adjusted and this makes no difference. If you go 1 mph it is a tolerable level of waste but if you go 3mph you can grab it by the handful in that spot off the ground. any ideas? would a hole in the rotor cone cause this? | |
|