|
NW Iowa | At the end of the wrap cycle nothing happens. The electric actuator on the net wrap stays extended keeping it feeding wrap on the bale. I have to stop the PTO after 5 seconds of this or it wraps the hell out of the bale. Then, the only way to return the net system to the home position is to go in diagnostic mode to channel 18 and retract the actuator manually, which brings the knife down, cuts the wrap and ends the cycle. At this point I turn the PTO back on which cuts the wrap since the knife is back in the home or cutting position. | |
|
John Deere 567 Baler trouble
