Posted 5/30/2023 19:29 (#10249951 - in reply to #10249557) Subject: RE: Fill-right pump pressure. Splice hose with hose barb question.
Big Ben - 5/30/2023 14:10
rkline - 5/30/2023 10:23
Ive done it with no problem
Same
Yup. Was years before I knew factory hoses had crimped on fittings. Standard operating procedure here was when the hose starts leaking at the end you trim it back a bit, shove it back on the barb and redo the hose clamp till it gets too short then join two old hoses together.