Posted 5/30/2023 12:45 (#10249525 - in reply to #10249425) Subject: RE: Oliver 60-T square baler spins at flywheel but won’t turn the rest
Central Illinois
Our New Holland plastic twine baler requires the needles to be pulled back into the home position. There is also a latch that resets after the knots are made which will have to be reset manually. As the baler ties; the arm comes up, triggering the knotters to tie, then after completing the cycle the knotters and needles are reset to home position. I hope that helps. I assume the wire tie has a similar system.
Oliver 60-T square baler spins at flywheel but won’t turn the rest
