|
| I have a 275 CIH Magnum tractor -- 2008 model, I think. I'm having issues with the hydraulic flow rates changing on their own even without turning the dial in the arm rest.
For example, the #1 flow is supposed to be at 100%, but it will go down to 75% even with the dial turned to the max. It seems to be the worst problem after I start the machine, then after a couple hours it seems to go back to the flow values where it is supposed to be set. I have the issue on #1, #2, and #3. The hyd levers seem to function otherwise normally.
Do the flow control potentiometer knobs go bad, or is there some other more complex issue? Thank you.
| |
|
Magnum hyd flow rates changing
