Posted 5/28/2023 10:31 (#10246791 - in reply to #10246616) Subject: RE: Flow issues with a Raven system
Idaho
They are metering tubes. 8 foot length and .060 ID. Suppose to flow low viscosity fluids at .03-.06 gal/min at a psi from 10 to 40 psi.
On the control valve is it response time or failure rates that steer you away from the 3/4 inch?
It was a package deal. If I was to do it again I think I would have gone flange mount and put it all in one line. I hear what you are saying about the pump.
Flow issues with a Raven system
