|
| We bought a new holland T8020 super steer two years ago and put a trimble gfx 750 with a nav 900 and a nav 2 controller in it. We have had nothing but fits with it. We will be going through the field and it will randomly kick out and a notification saying direction estimator not initialized change speed. Our dealer sent our nav 2 off to get reflashed, while it was gone he let us barrow a nav 3 and still had the same problem. Come to find out there was a firmware update we didn't have. Our dealer updated every thing we got our old nav controller back and it is still giving the error code and also now going through the field, it will randomly think you're going backwards which is horrible when your planting and dont catch it right away. We are pretty fed up with it to say the least. It will do it over 30+ times a day. Our dealer has been pretty good but has started saying it's probably a problem in the tractor wiring harness. We are considering switching to agleader but we have some questions first because we know nothing about their systems.
1. Is agleader able to run our planter that has been converted to trimble
2. Would we be able to use our trimble iso plug and NAV controller so we would have another expense?
3. Are they as simple as the gfx 750?
4. Has anyone else had this problem and if so what were you able to do to fix it?
Any and all help is appreciated as we are about to light a match to the tractor and everything | |
|
Fed up with trimble
