AgTalk Home
AgTalk Home
Search Forums | Classifieds (206) | Skins | Language
You are logged in as a guest. ( logon | register )

Raven 440 Replacement with Field IQ and GFX 750 Setup
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 5/24/2023 06:26 (#10241335 - in reply to #10241223)
Subject: RE: Raven 440 Replacement with Field IQ and GFX 750 Setup


Near Intersection of I-35 & I-90 Southern Mn.
I have no experience with the GFX750 and Field IQ but have worked personally and as a Tech with Raven and Ag Leader setups. Most screens seem reasonable. I am uncertain about the meter cal screen.

It seems to ask for the flow meter type which is listed as Trimble. I assume you are using a Raven flow meter from the past.

The confusion can come about with the meter cal. The meter cal stamped on a Raven flow meter is for use with a Raven controller and is the number of pulses produced for 10 gallons. The meter cal used by many other brands of controllers is for just 1 gallon.

Normally you would use 700 with a Raven controller but only 70.0 with a controller from another company. If the flow meter type can be changed from Raven to Trimble, then maybe 700 would be correct for your setup.

Hopefully someone with experience with your equipment will respond.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)