|
SW MI | Have a new (to us) AgLeader spreader setup with 3 channel spinner/spreader, aux. module, and single master switch. Brand new 1200 and 7500. First master switch harness (used) didn't work for us so dealer sent us a 2nd used one. This one had trouble initially being recognized in the diagnostics, but overall on day 1 I was able to spread with only a few instances of the switch not turning on, or turning off during a pass. Cleaned contacts and checked to make sure wires were all seated well in the green plug.
Now today we are trying to spread and can't get the switch to be recognized at all in the diagnostics or the toggle symbol in the bottom right of 1200 screen. Is there any sort of troubleshooting to the Aux Input Module itself? It's a used unit and we're fairly new to AgLeader so still trying to understand if it is 2nd bad switch, or something with the aux module itself. Thanks. | |
|