|
NEWI | I ordered it through a hydraulic shop, gave them all the skidsteer specs….(of course was the more expensive one) but shouldnt blow up. It came in a “White” box but no real name tag on it.
Just make sure you use a check valve between the hoses so it can spool down, when you shut off the hyds.
I have a few pics of building it, but tried to reuse most of the steel that was on it before.
I used the knuckles from the pto…. Just welded a hub into it. I did spin the gearbox around, cause the front was all cut up…. reason for the big hole.
Edited by FarmerboyRoy 5/16/2023 21:14
(FCBD613E-2161-49AA-875C-3E2BB488EBB2 (full).jpeg)
(C5C9B23A-CC3D-4490-8F8F-ADC7110760B3 (full).jpeg)
Attachments ---------------- FCBD613E-2161-49AA-875C-3E2BB488EBB2 (full).jpeg (169KB - 30 downloads) C5C9B23A-CC3D-4490-8F8F-ADC7110760B3 (full).jpeg (223KB - 23 downloads)
| |
|