|
| Started the 4630 sprayer today and all seemed normal after loading. I was going to fuel up and got an error screen pop-up that said communication had been lost with the ECU but then went away. When i started spraying, the Section Control checkbox was grayed out with no way for me to turn it on.
I turned the machine off, unplugged the display, reconnected and restarted and nothing changed. I disconnected the batteries hoping to cycle all the electronics and still nothing changed.
I verified that Section Control Activation was turned on. When i go to the Section Control diagnostics page in the Greenstar 2630, it says “Controller: None”, “Section Control Capable: No”.
I went to the sprayer diagnostics test screen, and when i select “SRC -Spray Rate Controller”, the Hardware info will not populate as though there is no controller installed.
Any ideas? Deere techs couldn’t offer any advice over the phone and I’m not sure when they can get to it next week. | |
|