AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Delta Force pressure low
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Purdu21
Posted 5/12/2023 16:18 (#10226564)
Subject: Delta Force pressure low


WCIN
We pinched a hose yesterday, replaced it, and then pressure was only running around 500 psi on the diagnostic screen in the 20/20. I unplugged the hose from the SCV on the tractor thinking there might be a loose connection, but there were actually pieces of rubber hose in the hydraulic line. We think we got all of the pieces out of the system, but no luck. Still low pressure. So we took the valve block off and checked all of the ports and valves for more hose pieces, but it all looked fine. Reassembled the valve block and we are still getting low pressure. Can get full pressure running the flow the other way though even when we first had issues.
Is there a chance we have a bad valve? Anyone else encounter this issue?
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)