Posted 5/5/2023 20:45 (#10217458 - in reply to #10216947) Subject: RE: Trimble Field IQ with Raven flow meter not communicating
perryton, tx
This is on a strip tiller. The hardware was installed in December and we ran a couple thousand acres before this problem cropped up. I can run in manual and it flows just fine but doesn’t register any gallons per acre being applied. In fact that’s what I did to finish the field we were on and I just manually set the flow based off the pressure we had been running on the gauge that’s on our red ball manifold.
Trimble Field IQ with Raven flow meter not communicating
