|
East central Ohio | Have an agleader compass that I use for tillage and litter applications. Installed a new to me ontrac 2+ and was going through the calibration process and couldn't get it to quite work right. (Since found and solved that issue) but in the meantime noticed the firmware needed updated on Compass. Updated firmware and now the compass locks up on startup. Shut it off and restart and it goes into service mode, then check marks everything green on it's diagnostics. It does say "initiation error " while it's in service mode. Swapped compass out for a versa and it works fine. Take compass to tractor with ontrac 2 and it doesn't lock up but doesn't recognize the ontrac 2 at all. Any ideas before I get on the phone with agleader?
Thanks | |
|