|
perryton, tx | I’m doing the same thing although my GPS units are Trimble FMX. The only advice I can give is that you absolutely have to have a null modem in the signal chain between the NAV and the 2630 for it to work. Also, I’ve been told that with 3rd party GPS the bar will not fill in but as long as it says RTK you’re good to go…Although I’ve noticed that on one of my displays the bar does fill in green while the other doesn’t but they work equally well. One last tip is that using the AE 3073 harness from Ag Express gives you a direct tie in for sending GPS from the NAV to the 2630 using a serial cable and simplifies things quite a bit. | |
|