Near Intersection of I-35 & I-90 Southern Mn. | When I had a Trimble system on a FWD tractor I had problems with the stub cable for auto sense bending and eventually going bad.
I made an extension with a male Deutsch connector on one end and a female on the other end that I put between the stub sensor cable and the tractor cable. I made the extension out of heavier wire so it could bend without breaking. I tied banded the Trimble Stub cable down with cable ties so that it did not have to bend. All bending took place in my extension. I happened to run across it the other day and no longer have need for it.
$20 and its yours. My email is in my profile.
Edited by tedbear 4/28/2023 12:14
|