|
NW IL | On your pro 700 try changing “gps source” to can-b. Also in the pro 1200 I think you will likely need to turn on gps settings for port 2 (assuming that is how the ag express cable is wired). I am not well versed in the 1200 but somewhere in that monitor there are setting for gps “out”
If it were me…..I would rig up a cable to send GPS into the 9 pin serial on the back of the pro 700. I realize your cable doesn’t have that capability. I know I could make the serial port on the back of the pro700 and a 3rd party gps. I have no idea how can-A/can-B works on pro700 and if it will recognize it he vector pro or not.
| |
|
Vector Pro to Pro700 for mobile mapping
