|
Quebec, Canada | Start by calling the wheelman/ag junction support line. I found them very helpful the couple of times that I called in.
I’m getting CAN GPS from my Wheelman Pro for my FieldView Drive to map everything I do with my tractor. There is a 4 pin connector near the IMU that has 12V+, ground, CAN hi and CAN lo. Many systems only want serial GPS (NMEA 0183) so you might need something like an actisense converter. I’ve only ever used an actisense converter to change serial GPS to CAN GPS, so you might need to get in touch with the company that makes Actisense to see what you need to do to set up the Actisense to output the NMEA messages that your other device needs. | |
|