AgTalk Home
AgTalk Home
Search Forums | Classifieds (151) | Skins | Language
You are logged in as a guest. ( logon | register )

Ag Leader GPS 7500 speed output setup
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
cmetzg
Posted 1/24/2023 11:48 (#10056933)
Subject: Ag Leader GPS 7500 speed output setup


I’m currently using an Ag Leader Integra / GPS 7500 for VR fertilizer spreading via serial control of a Raven 660. The speed signal for the 660 has been coming from an Outback lightbar; however, I am getting an external lightbar (L160) for the Integra. With this change, I planned to pull a speed signal from the “Speed Out” connector on the 7500 harness for the Raven controller.

I happened to have spare connectors, so I put together my own cable to connect to the 660. However, on testing the cable, I am not getting a speed readout on the 660. Are there setting changes I need to make in either monitor, or do I need more than a simple 2-wire cable? Or am I on the wrong track entirely?

Thanks in advance!
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)