Near Intersection of I-35 & I-90 Southern Mn. | I've found at least with my CFX 750 that if I set the A Point, it will say drive 150' and set the B Point as you mention. I find I must drive considerably further until the screen shows select the B Point. If I wait until the screen says select the B point and then set it, it works fine. If I try to set the B point before the message about selecting the B point appears, it merely resets the A point and I would need to drive a fair distance beyond that new A point before getting the message to select the B Point.
Mostly I use the A+ pattern where I set the A point and a heading. This give me guidance/auto steer on the first pass without even having to drive at all. I use the A+ feature almost always since that tractor is only involved with primary and secondary tillage. |