|
southern Illinois | We do have autosense, the little black box on the kingpin. We have updated soft ware and went through the list in the book of things to check. Others have said if it was working before it may be the cable to the autosense?? I have tested the wiring and didn't find any breaks. Is there a way to test the autosense box?
I ran it through the slew calibration and it steered find doing the test. Set up a b line and steers full towards the line from either side then full other way and throws the code.
Thanks for any advice, we are still trying to make it steer right. Not a local dealer to contact or I would have my now.
Edited by commissioner 9/23/2022 13:47
| |
|