AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

2600 display won't detect Starfire 3000 on combine
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
GcDm2010
Posted 9/12/2022 22:53 (#9841936 - in reply to #9841664)
Subject: RE: 2600 display won't detect Starfire 3000 on combine


Typical CAN voltage should be 2.5v. The round plugs don't do anything except for the 9 pin that connects to your ATU, in my experience anyway.
Do you still have the brown box, and if so, does the 3000 still work with it?
If the brown box doesn't work, next thing to check would be the receiver itself. I've had the harness between the combine and the receiver go bad before. Simple as switching receivers if you have one or placing on another machine.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)