AgTalk Home
AgTalk Home
Search Forums | Classifieds (22) | Skins | Language
You are logged in as a guest. ( logon | register )

D3G Caterpillar Sprocket Segment BOLTS
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
hillfarmer
Posted 7/3/2022 05:09 (#9731435 - in reply to #9731341)
Subject: RE: D3G Caterpillar Sprocket Segment BOLTS



bleedgreen720 - 7/2/2022 23:51

Replaced sprocket segments, One hole was stripped one bolt broke off. Bolt has a 19mm head and thought was 12mm bolt so ordered a helicoil kit with a 12mm 1.25 pitch. I tapped the hole all the way through and threaded the helicoil in by hand, Cannot get that bolt to start. It seems a hair larger maybe its a 1/2 inch fine thread bolt with a 19mm head ? Maybe the head is 3/4. However the nuts that came ith the new bolts had "12" stamped on them. A 15 minute job has been a couple hours and still not accomplished. Any insight would be appreciated.

Thanks


It's a Cat

It is a normal USA thread not metric

the 19 mm head matches a 3/4 !!!
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)