Near Intersection of I-35 & I-90 Southern Mn. | Raven would have them as they were used with their 203 Manual sprayer control and the SCS400 and SCS 440. I wouldn't be too concerned about keeping them original since if you traded the sprayer you would likely trade the tractor portion also.
Raven themselves uses the 16 Pin AMP connector that this location since the 6 pin shown could not handle all the sections. Raven has a console cable and also an implement cable that use the 16 pin AMP connector instead. The wiring pattern follows the connector on the back of the 440/450. I believe that's the route I would take. Raven no longer makes the 440 so a new Raven controller in that category would need to be a 450 which uses that style of connector on both ends. |