SWOH | mohoff - 7/1/2022 06:15
I made one for my kids out of 4 or 6 inch pvc pipe and drilled a hold and screwed a hog nipple in. Ordered them on Amazon I believe. I looked online and copied some of them. We use big hose clamps to fasten to panels at fair. I can get a picture later if you'd like. One fair we go to they're required to have one no water pans allowed to cut down on mess.
That’s what I did… 6” pvc about 2ft tall, glued a cap on the bottom, drilled a hole and threaded it and screwed a nipple into it. Hold it on the fair panels with a couple of big hose clamps and a big ziptie around it for good measure. There is a local county fair in our area that won’t allow pvc waterers at the fair for some reason but we don’t go to that one. |