Posted 7/2/2022 07:23 (#9730361 - in reply to #9730210) Subject: RE: Fm 750 and ez steer always to left of ab line
John Smith - 7/2/2022 00:45
For sure it has done this on WASS, Thinking that it did it on RangePoint, Probably works ok on RTX, Never have used RTK. What I am talking about is doing a dry run on the field edge, Laying out the AB line, Seemed to be where it needed to be, Turn around and the line is not really where I wanted it to be. Never had it jump on subsequent passes.
Can't say I've had that happen.
Since you said "on the field edge", do you by chance have boundaries enabled and a boundary made in the field this happened in?
I'm just spitballing here and have no idea if this is your problem or not but if your boundary shifted in relation to your actual field it is plausible that it won't let you make a line outside of the boundary.
Not sure it would do that or not but it is possible that it would if you have all of your implement dimensions entered in and it won't let the implement get outside of the boundary.
Fm 750 and ez steer always to left of ab line
