|
Butterfield, MN | Great info there. That's a SmarTrax long box with a yaw sensor and TM-1 tilt sensor getting GPS from a Phoenix 300. Did you think that when it was weaving that you were in softer ground or nothing really noticeable? I'd at least want to make sure that the yaw sensor is stuck down well still and not loose, and make sure that the wire going to it isn't getting pulled around when the seat goes up and down or something like that. Also, you could try bypassing the TM-1 when it happens, take the two plugs going to the bottom of it and plug them straight together and see if the weaving stops. | |
|