AgTalk Home
AgTalk Home
Search Forums | Classifieds (68) | Skins | Language
You are logged in as a guest. ( logon | register )

FMX field iq as rate controller in Hagie 2100 / dts10
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Dirtfarmer1000
Posted 6/28/2022 23:13 (#9725906 - in reply to #9725083)
Subject: RE: FMX field iq as rate controller in Hagie 2100 / dts10


Alberta
I just put one in a case using a raven controller. I got ag express to make me up the amp plug to plug into the harness that plugs into the controller. $250 with a 6 foot 36 wire cable. The I added the deutche connector that plug into the iq harness. takes time, but if you are handy with wiring it saves a few dollars. not sure the type ove valves in a hagie, but if you have reverse polarity valves, you would need to set up some relays to run your vavles. I had to do that when I set up an ezboom in a melroe spra coupe., but same thing, and afternoon wiring and 6 10 dollar relays and save 600 bucks on a harness. Also if you use the IQ you can just take the raven controller out, as the fmx will do it all. You also do not need the 12 toggle field IQ s+witch box, only the small box. The valves can be controlled in the fmx.

Edited by Dirtfarmer1000 6/29/2022 01:24
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)