West Chazy, New York | You can make a pretty good radiator with two inch iron pipe. Ten foot runs that go back and forth along a wall with about a foot of slope for each run. Use two 90 degree elbow at each corner. At the top elbow it into a vertical drop with a drain at the bottom that will act as a moisture trap. Put a trap with a drain between the radiator and the compressor as well. Maybe not quite as good as a refrigerated unit, but I had that in Hawaii for several years and it worked very well. It was quite humid where we lived. Here are some pictures of my old system. https://talk.newagtalk.com/forums/thread-view.asp?tid=439364&mid=3538192#M3538192 |