|
| Have two CFX 750’s, and want to create my own implement switch for coverage logging, and also a remote engagement button. Need some help with pins and ports.
I believe for the 750’s using ez-pilot, the remote engage it is pins 8 (Ground) and 11 (Digital I/O) in port B Only (I have to connector through the 12 pin DTM on the Sonalert cable)
For a implement switch, pins 10 (Digital Ground) & 11 (Digital I/O) of port A.
I was also thinking about adding cameras onto one of them for the grain cart.
Camera A – Port A
Camera B – Port B, through the Sonalert cable, PINS?
What pins?
Pin 6 – Video In
Pin 7 – Video Out
Pin 8 – Power Ground
Pin 9 – 12V out
Could use some clarification before I start to buy and setup things.
Thanks.
| |
|