AgTalk Home
AgTalk Home
Search Forums | Classifieds (5) | Skins | Language
You are logged in as a guest. ( logon | register )

Caseih Spx3310 raven scs4600 with aim rate jumps around
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
boog
Posted 6/24/2022 20:26 (#9719702 - in reply to #9719240)
Subject: RE: Caseih Spx3310 raven scs4600 with aim rate jumps around



Had something similar on our 3310 with AIM Command a few years ago. Dealer said it was the flowmeter. Drove 2 hrs 1 way, spent $1,000 for new meter, then 2 hrs back, installed new meter only to have same issue. Tech came out & after a lot of testing decided it was a bad transducer on the boom. Switch wiring between transducers, solved problem . Had to order new transducer, about $300, but was able to run till got new transducer though iirc didn't have spare pressure readout on the monitor.

Transducers are on middle section of boom on left side where main hose comes in. Look sorta like a spark plug with a two wire connector on each one. Try switching wires & see if that helps.

Goodluck,
boog
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)