Posted 6/23/2022 21:07 (#9718367 - in reply to #9718199) Subject: RE: L 160 new holland skidloader problem
Assuming you don't have a puddle of hydraulic oil under the machine, it is either the internal seals on the cylinders or the valve block. How many hours on the machine, and what conditions was it run in? Also the linkage from pedals to valve could be out of adjustment. Don't have enough info and history to give a positive take on the problem. Some slow settling is normal on any used machine, but you didn't state at what rate it drops. Part of an inch, or feet per minute?