|
Southeast Minnesota | There is a check valve in the hydraulic unit. On my unit the check valve is on the side of the solenoids. It is under the steel plug. The opposite side has a steel cap. This is the pressure relief valve. You can take the cap off and adjust the relief pressure screw there.
Open the check valve side and look for any debris. I think there is a ball, spring, some orings in there. You can take the nut off the solenoids and either rotate them or remove them to get clearance to the plug.
Ours started the creeping out. It got to be regular. Since working on the check valve, it now only does it once and a great while.
Edited by Busted Knuckles 6/24/2022 14:06
(ED73D515-8B77-4A6F-993D-83C76AC9A039 (full).jpeg)
(68E385A9-09C0-42D2-90B5-996D1CB34BDA (full).jpeg)
Attachments ---------------- ED73D515-8B77-4A6F-993D-83C76AC9A039 (full).jpeg (115KB - 67 downloads) 68E385A9-09C0-42D2-90B5-996D1CB34BDA (full).jpeg (137KB - 124 downloads)
| |
|