AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Hagie sprayer with in command 1200 section control question
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 6/21/2022 12:58 (#9714956)
Subject: Hagie sprayer with in command 1200 section control question

I have a Hagie and when i am exiting the headland pass that has already been sprayed the sprayer seems to jump to a pressure thats way to high. couple questions here, Is is going off the speed it last sprayed at? I typically go my normal spraying speed all the way until the section control shuts the spray off, then I slow down for the corner. Should I be slowing down to my turn speed before it shuts off and then it wont turn on at such a high rate right away leaving the headlands? also wondering if it makes a difference in hwo the valves shut off if you let section control turn it off or if you manually turn the master off, does the Valve do the same as far as holding pressure?

A semi related question for the min flow setting in the controller settings, do you calculate off the min that the manufacturer says for the tip? Like for tee jet XR they say 15 psi, do you calculate off that or pick something a little closer to ideal like 20 psi?
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)