|
Ontario | Connect mobile is functioning in 3 different ways for combines
1) secondary screen for more map visibility in combine
2)split screen historical data in Ops Center with the selected layer (yield, moisture etc)
3) show other possible available layers not normally mapped. Big one that is handy for combines is showing you the calibration factor on the map so you can see different spots you calibrated the machine along with direction of travel. Nice for fine tuning the combine settings.
As far as I know, the map layers are not uploaded to Ops Center and are just reading the data from the display/machine side. The yield/moisture is being recorded and sent to both iPad and Ops Center for later use. | |
|