Near Intersection of I-35 & I-90 Southern Mn. | Are you using the special Raven Radar power cable? The Raven Radar will plug right into the back of the 450 but it will only be receiving 5V and it needs 12V. Another cable is needed.
A special power cable is needed that has the Raven (Conxall) connector on one end to mate with the 450 and the opposite connector on the other end to mate with the Raven radar cable. This power cable will have a pair of loose wires sticking out of it. The Red wire needs to go to 12V such as the Raven Orange wire in the display cable or some other switched 12V source. The white wire needs to go to ground such as the Raven white wire in the display cable.
Edited by tedbear 6/11/2022 10:08
|
Trouble getting GPS speed on guidance and radar speed on rate controller to match
