|
East Central, Nebraska | i would think that with that new of tractor, with it being factory guidance it would have a steering angle sensor and not an autosense. is it a true little black box on the axle or is it a sensor with a black box protecting it? either way it is entirely possible that is your issue but rarely does one see the steering angle sensors having problems. autosense cables are very common for having issues.
i have a 215 doing a similar thing i believe that it is due to an implement setting telling the monitor that it has a long implement hitch behind it and it is trying to put the implement on the line when turning and is less focused on where the tractor is doing so. same situation as you, if i turn in just right it will not do it. i did not mess with it as if i turned in pretty good it was not an issue and implement coverage map was far more important. i would check some settings before i went tearing into it. | |
|