|
Hiawatha, KS | Please try the following instructions if switching Satellite's does not work.
Erasing the Flash Memory in the S2/S-Lite Console:
Before proceeding with an erase flash procedure, please be sure to document all settings such as swath width and custom NMEA settings as you will be returning the console to its factory default settings. You may re-enter your settings at the end of this procedure.
Disconnect the antenna input from the side of console.
Press “Stop Guidance” and then “Enter” quickly one after another- This may take several attempts.
A menu will appear: “BD Menu – Keyboard Test”.
Use the down arrow until the cursor points to “Erase Flash”.
Press “Enter”- The console will display “Erasing Flash” and it will count down from 20 and the LED’s will cycle through once.
Turn off the unit, re-attach the antenna, and power the unit back on | |
|