|
| So the planter came with a 20/20 and rowflow, we have a FMX and field iq present along with an extra Trimble RSCM present and we’re going to put on the Trimble module. It’s a bean only planter and we don’t need the 20/20 or the rowflow and want to swap for familiarity’s sake.
They are the non polarity sensitive (white wire) clutches. I did some visual searching yesterday and found the 6 pin weather packs that lead to each section, I can get ahold of the harness to adapt to the Trimble module (I believe I have one laying with the module), I just don’t want to plug it into the existing 6 pin weatherpacks until I know I won’t damage anything. | |
|