|
SESD | I bought a new leader 3030 g4 box that is controlled with direct command. I am not able to get the spinners to adjust and they are only at about 300rpm. I tried on 2 different tractors. These are the settings the previous owner used. Any and all help appreciated.
Edited by JRthefarmer 5/27/2022 17:06
 (IMG_20220527_084608 (full).jpg)
 (KIMG0116 (full).JPG)
 (KIMG0117 (full).JPG)
Attachments
----------------
 IMG_20220527_084608 (full).jpg (67KB - 180 downloads)
KIMG0116 (full).JPG (54KB - 183 downloads)
KIMG0117 (full).JPG (50KB - 181 downloads)
| |
|
Agleader spinner spreader control help
