|
| It doesn’t stay on 0 it shows it going off the line. We have ILS and the linkage that comes from the wheel motion sensor arm had a little play in it. I am going to swap that out before we go to the field next and see if that helps. We did calibrate steering and that helped also. There is a little leaking going on up front but the deere tech said it was pretty normal.
This was two year alfalfa that was double disked and ripped at an angle and it is soft so I’m sure that’s making us S a little but we’re on our third pass across the field on the same tracks so we should be getting more solid footing now. Unless our old tracks just have enough movement in them?! | |
|
RTK swerve
