|
Central MN | I have a Trimble 262 , port A is sending NMEA to an Integra, port B is sending NMEA to a 20/20 seedsense monitor, and I have a Bluetooth adapter on port C, connected to my Android phone with the NTRIP app. It'll get RTK to the displays, but every 5 seconds the app shows it switching from RTK, to unknown, and back to RTK, and so on. Also, I have the port B set to 10 hz, but the GPS screen on the 20/20 shows the hz varying at times, usually it's 10, but occasionally down to 8, or up to 15. Do I have something set wrong? It seemed fine when it was just the Integra, this popped up after I reconfigured to add the 20/20. | |
|