|
Fargo, ND | Just to note, the StarFire's serial port output is terrain compensated (for side-hills), and it even has a "fore/aft" setting which will move your position quite a bit based on this value in combination with the yaw/heading of the receiver. Make sure the correct value is set/stored in the receiver, which you may need to do with a standalone GreenStar harness on the Case as these offsets are "forced" (values are greyed out) into the receiver after being mounted on a Deere tractor. In some cases, I've set the fore/aft to zero and put all the geometric offsets in the screen (when possible).
(SF 6000 Setup Page (full).png)
Attachments ---------------- SF 6000 Setup Page (full).png (40KB - 47 downloads)
| |
|